Billet Interior Trim
All Split 'n' Pinned products are an exclusive trademark of Watson's StreetWorks.
Exclusively
 by StreetWorks
Steering Column Trim
Give your steering column the finished look with our machined aluminum trim with heavy duty rubber seal. Made with StreetWorks unique Split 'n' Pinned design for easy installation - no column removal required. The ring measures 3.420" I.D. and 4.800" O.D. and includes stainless steel mounting screws. The rubber seal has an opening to fit GM and other columns measuring 1-3/4" to approximately 2-1/8" diameter. Some trimming may be required for larger diameters.
Now with an additional grommet to fit 1-1/2" diameter columns. |
 |
|
#B03N |
$39.00 |
| #B03S (Rubber Seal, Only) |
$20.00 |
| #B03R
(Aluminum Ring w/Screws, No Seal) |
$25.00 |
Oval Brake & Clutch Trim
Use on cars with elongated pedal shafts. Also great for use
on the firewall with accelerator cable and kick down and for some TPI
applications. Choose from a solid machined part or our Split 'n' Pinned
trim. Both are 2-1/4" diameter with a 5/8" x 1-1/8" hole and stainless steel
screws and rubber gasket. |
 |
|
#B02 (Solid) |
$15.95 |
|
#B02S (Split 'n' Pinned) |
$19.95 |
Oval Hole/Oval Body Brake & Clutch Trim
Great new Oval shaped body. For elongated or
rectangular pedal shafts Also trim the firewall for accelerator cable
and kick down or for some TPI applications.
1-5/8" X 2-1/4" wide. 5/8" x 1-1/8" hole. Stainless steel screws, Rubber gasket, Split 'n' Pinned trim. |
 |
|
#B02OVS (Oval Split 'n' Pinned) |
$24.00 |
For a solid Oval trim, see our #B14OV-PLT
Round Brake & Clutch Trim
Small, round hole trim allows you to finish the brake and clutch pedal shafts and around the dimmer switch. Also great for around wires, hoses, harnesses or anything you want to trim. Choose from a solid machined part or our Split 'n' Pinned trim. Both are 2-1/4" diameter with a 15/16" diameter hole and stainless steel screws and rubber gasket (not in photo).
|
 |
|
#B01 (Solid) |
$15.95 |
|
#B01S (Split 'n' Pinned) |
$19.95 |
Brake Pedal Hole Trim Plate
From our friends at Sachse Rod Shop. Each piece is 2" X 4" with a 1/2" wide slot. Overlapping feature allows the slot to be 1-1/4" to 2" long. 18 gauge steel. Predrilled holes and stainless screws. Helps make installation very simple.
|
  |
| #SA-6510 (2 plate pieces and 4 screws) |
$12.00 |
Trik-Trim Billet Upholstery Plate
Add the distinct look of billet to complement and finish your upholstery project. This attractive billet oval will set off your ride as the one to emulate. Oval is 1-1/2" X 1-5/64" with milled, raised edge. Put on the doors, seats...almost anywhere that you would like an accent. Details are what it's all about and these are great additions. Fastens with blind stud and hardware included. Milled finish is easy for you to polish.
|
|
Power Port with Billet Plug
Accepts any 10-32 threaded knob to match your interior.
With all of the modern electronic devices that you need to charge, what's missing from the average street rod??? A Power Port, of course! And StreetWorks gives you one that is not only attractive but also can be made to match the rest of your interior. Our Power Port with Billet Plug features an easily installed Power Port (fits into a 7/8" diameter hole), wiring terminals, an attractive, machined Billet Plug with O-ring retainer, a spare o-ring and a 10-32 threaded stud for attaching the decorative knob of your choice (sold separately).
|
| #B23 Power Port with Billet Plug |
$29.00 |
| #B23P Billet Plug Only (w/stud & o-rings) |
$20.00 |
| Plug Only fits most OEM power ports. |
|
NOTE: Photos with knobs are shown for example only. Knobs are priced separately.
Billet Drink Holder
What
do you do??? You're at the Burger-Doodle drive-thru window, get your
double-burger, large fries and drink - the burger and fries kinda' stay
in the bag, but the drink has got to go between your legs. So now you're
steering with your left hand, your right hand is bouncing between the
stick shift, french fries and burger, left leg clutch, right leg
brake...and that drink is r-e-a-l-l-y cold. ● Get
our beautiful, Billet Drink Holder! ● Magnetic
base holds tight on the glove box door, yet removes easily to store in
the glove box. 3" I.D. x 2-1/8" deep holds most drink cups. ● Inner
plastic cup to catch condensation. ● Dual-black
O-rings for added looks.
|
|
Great gift idea! Machined aluminum drink holder with O-rings and magnetic base!
Rod-Bits:
Watson's StreetWorks originated Split 'n' Pinned Aluminum Trim for the street rod market back in 1988, our very first year in business. Simply stated, we take the extra steps to "match-machine" two halves of a part that are then pinned together to make the finished piece. This allows you to install the trim around the steering column, brake or clutch pedal, etc. without having to remove them. Once snapped back together, the mating seam is all but invisible.
This approach works very well for interior dress-up around the steering column, through-the-floor brake or clutch pedals and wire bundles. Our gaskets and/or gasket materials that come with each item help to seal out water, air and dirt. A similar concept has been used by the guys at Sachse Rod Shop for their Brake Pedal Hole Trim Plate. While not intended for interior "trim", it helps to seal out the elements and make a clean installation for the brake/clutch pedal arms. Its overlapping design allows for adjustment of the hole size to fit your needs.
All of our products at Watson's StreetWorks are intended to make your life easier by providing easy-to-install, convenient, good looking parts for your favorite ride. That spirit started with our very first products - our Split 'n' Pinned Aluminum Trim.
|
