Ignition Switches & Ignition/Start/Stop Systems

The 'Hot-Dot' All-in-One Ignition/Start/Stop Switch Put your Ignition Switch and Starter all into one unit. This gorgeous chrome recessed switch is 3/4" diameter and has an LED ring to indicate when the ignition is "On". Push and hold the button while the starter turns over and release when the engine starts. The ignition stays "On". Push again to stop the engine. Clean, slick, neat, state-of-the-art. This is a clean, compact switch. For a larger switch, see part #L75-22 below. Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!

Switch only-

For momentary or On/Off functions and either positive (+) or ground (-) switching, rated 1 amp maximum load. Specify Blue, Green, Red or White LED indicator ring. For higher loads see our Relay page.

Latching and Starter Relay sets -

Use with your own mom. grounding switch.

Latching Relay set only -

For other latching applications.

Ask us about 1-switch Ignition / Start / Stop and Accessories!

---

 

Black 'Hot Dot' All-in-One Ignition/Start/Stop Switch Just like our Chrome Hot Dot Switches but in Black finish. This gorgeous recessed switch is 3/4" diameter and has an LED ring to indicate when the ignition is "On". Push and hold the button while the starter turns over and release when the engine starts. The ignition stays "On". Push again to stop the engine. Clean, slick, neat, state-of-the-art. Now in black finish.

 

#L75BB/GB/RB/WB (Black)

$130.00

 

Switch only -

For momentary or On/Off functions and either positive (+) or ground (-) switching, rated 1 amp maximum load. Specify Blue, Green, Red or White LED indicator ring.

#L75SMBB/GB/RB/WB (Mom. Black)	$25.00
#L75SOBB/GB/RB/WB (On/Off. Black)	$25.00

We can do all kinds of switching with these bad boys - give us a call for ideas.

 

---

 

Billet Face Plates for our L75 series switches A great way to mount our L75 series switches (switches sold separately) - put an Ignition switch and an Accessory switch side-by-side. The plate is 1" wide x 2" long and secures with the switch nuts. L75 switches sold separately. (Do not fit L75-22 switches.)

 

#L75FP-2 (2-switch face plate, 1’ x 2”)	$15.00
#L75FP-3 (3-switch face plate, 1’ x 3”)	$17.00
#L75FP-4 (4-switch face plate, 1’ x 4”)	$19.00

We can do all kinds of switching with these bad boys - give us a call for ideas.

 

---

Another Neat Way to Mount a Single L75 Series Switch Our L75 switches fit perfectly inside our #L47N Ignition Switch Nut (also listed below) and provides a neat decorative look that can be matched to our other billet o-ring nuts. L75 switch sold separately.

#L47N  (Billet Nut with O-ring)

$12.00

---

Larger L75 Series Switches Big fingers? No problem. These 22mm switches will work with our Hot Dot All-in-One Starter Relays or do any other momentary switching function. Available with blue, red or white LED illumination ring. Fits into a 7/8” diameter hole. Overall diameter is just under 1”. 1 amp maximum load. Now available in either Momentary or On/Off functions!

#L75-22SMB/R/W  (Momentar - blue, red or white LED ring)

$25.00

Latching and Starter Relay sets -

For Hot Dot All-in-One Starter - use with the above Momentary #L75-22 switch.

#L75X

$105.00

 

Now also available in an On/Off version

For other switching needs. 1 amp rating, so see our Relay page for higher amperage needs.

#L75-22SOB/S/W  (On/Off - blue, red or white LED ring)

$25.00

---

 

New! Hot Dot Ignition Link (TM) Hot Dot-to-Remote Control Interface Relay A great way to mount our L75 series switches - put an Ignition switch and an Accessory switch side-by-side. The plate is 1" wide x 2" long and secures with the switch nuts. L75 switches sold separately. This Ignition Link Relay allows you to enable and disable your StreetWorks Hot Dot Ignition Button using two (2) functions on a Remote Control (such as our Gemini, 2-function or other remote control). Push one remote control button and the Hot Dot Ignition operates, press a second button and disable the Hot Dot. Takes the place of a keylock to secure your car's ignition. May be triggered by either positive or negative (grounding) momentary trigger signals. Remote Controls and Hot Dot sold separately. Can also be used as a latching On/Off relay, 12 vdc, 5 amps maximum load.

#L88 - Hot Dot Ignition Link

$25.00

---

Ignition Switch with Billet O-Ring Nut We have seen a lot of really nice cars using the aftermarket ignition switch and the cast, ribbed nut that comes with it. That nut made the whole dash look cheap! So, let's fix that. Here is a quality ignition switch with 30 amp rating. Four positions -Accessory, Off, On and Start. 2 keys. Die-cast housing and mounting stem that's 3/4" diameter x 3/4" long. AND it has an attractive machined billet nut with decorative black O-ring. The perfect complement to our Contemporary Column nobs. #L47 Ignition Switch with O-ring Nut Only $29.00

You own one of those cars we were talking about and only need the nut and O-ring? No problem. Please check your thread size before ordering.   #L47N Nut & O-ring (3/4-20 Thread) $12.00

Billet Aluminum Key-Cover Stand out in the crowd with our Billet Key Cover. It fits our keys sold with parts #L47, L47S and V-IS. 2-piece construction sandwiches around the original key head and pins together. Measures 1-1/2" X 1-5/64" with 3/16" diameter key chain hole. Custom, one-off details without the price of one-off machining. Machined finish is easy for you to polish or engrave if desired.

What's that? You like the way that cast, ribbed nut looks? Great - just get that quality switch with the regular nut.   #L47S Ignition Switch with Standard Nut $19.00

Ignition/Start Pull Switch An old-time way to start your ride! The first pull position is Ignition/Accessory, the second is a spring loaded Starter. The body of this switch measures 1-7/8" long X 1-1/8" wide X 3/4" high, not including terminals. The mounting stem is 3/8-24 thread and will accommodate panel thicknesses up to 3/16". The black plastic nob has a 10-32 thread so that you can add one of our billet dress-up nobs. The electrical ratings are: Acc. = 10 amps, Ign. = 5 amps, Start = 5 amps, so check out our 70 amp relay for your extra accessories. With installation hardware and instructions.

#L71 (Ignition/Start Pull Switch)

$35.00

Replacement VW Ignition Switch If you're rewiring your VW and adding accessory circuits you need a new ignition switch that has that feature. Oh, yes. And it would be nice if it fit into the original dash hole...AND if it would clear the ash tray brackets. HEY! Guess what. This is it. This is a four position switch (Accessory, Off, On, Start) with a 3/4" shank, two keys and includes ring terminals for the outputs.

The "Road Kill" Anti-Theft Timed Ignition Shutoff What kind of jerk would steal your ride? Want to make him feel like "Road Kill "? When our kit is turned on, it will allow the car to start and run for just 10 seconds. Then all of a sudden the car stops dead and your horn (or alarm horn, not provided) goes off! Deceptively lets him think he's got it made then kills the ignition and blasts the horn to get the world's attention like no car alarm will. Includes 10 second timer, ignition relay, System On/Off toggle switch, horn feed (horn not included) and instructions. Make him feel like "Road Kill"

Rod-Bits:

Try to find any other company that has as many options for your ignition switch! And then try to match up your other switches like we can. Watson's StreetWorks goes all out for you - to give you choices, attractive, trouble-free products of superior appeal and dependability. We'd put all of that in our name if it wasn't so long, but be assured that it's all in how we approach what we do here. Gentlemen, start 'em up!