Custom Cars, Classic Cars, Hotrods, Streetrods, Roadster, Rod, CUSTOM CARS, CLASSIC CARS, HOTROODS, STREETRODS, ROADSTER, ROD, custom cars, classic cars, hotrods, streetrods, roadster, rod, hot rod, street rod, Antique, Automotive, Automobile, Vehicles, auto, aluminum trim, latch releases, hood deck, lights, indicators, LEDS, switches, license plates, power lock triggers, actuator, remote controls, latches, wiring kits, accessories, battery disconnect, brake switch, relays, radiators, catches, cable releases, VW, fiberoptic
Street Rod & Custom Car Products - Toll Free (866) 859-0513, 9-5 M-Th, 9-2 F EST home | contact us

Volkswagen Wiring and Products

Billet Drink Holder

What do you do??? You're at the Burger-Doodle drive-thru window, get your double-burger, large fries and drink - the burger and fries kinda' stay in the bag, but the drink has got to go between your legs. So now you're steering with your left hand, your right hand is bouncing between the stick shift, french fries and burger, left leg clutch, right leg brake... and that drink is r-e-a-l-l-y cold. Get our beautiful, Billet Drink Holder! Magnetic base holds tight on the glove box door, yet removes easily to store in the glove box. 3" I.D. x 2-1/8" deep holds most drink cups. Inner plastic cup to catch condensation. Dual-black O-rings for added looks.

#B-DH $35.00

Great gift idea! Machined aluminum drink holder with O-rings and magnetic base!


 

Custom Volkswagen Modular Wiring Kit

    

An Integrated Modular Wiring System designed specifically with custom VW's in mind. 18 circuit connections fed by 16 fuses. Panel base is 5-1/2" x 3". "Cage Clamp" wire connection. High-heat wire is GM color coded and marked every 3 inches. Horn relay. Turn signal and hazard flasher circuits. Engine compartment wiring (oil pressure, water temp, starter, neutral safety switch, brake switch, ignition switch, dist. coil, main power, alternator/regulator). Wiring for ignition switch, coil, fuel pump, headlights, running lights, brake lights, directionals and license plate, dimmer switch, gauge cluster, horn, turn/hazard, radio, heater, A/C, and wipers, 3 spare battery circuits and 3 spare accessory circuits. Fuses, flasher and relays included. Detailed installation instructions. NOT included are the headlight, dimmer or ignition switches so that you may retain your original VW switches if so desired. We strongly suggest adding our replacement in dash VW Ignition Switch, below, to take maximum advantage of the accessory features of this wiring kit. Alternatives for other switch conversions can be found on this page and throughout our catalog. Call with specific questions. (Made for StreetWorks by American AutoWire)

Click Here to learn "How to Rewire a VW in Style"

 

#VW-WK Custom VW Modular Wiring Kit $350.00



Volkswagen Bus/Transporter Supplemental Wiring Kit

Our VW Modular Wiring Kit for Beetles is the greatest wiring kit of its kind on the market. But if you own a Bus/Transporter, some of the wires to the rear end will be too short. NO WORRIES! This supplemental kit provides an extra 72" length of wire for all of those 15 key circuits - and they're color coded and line marked to match our VW wiring kit. So now you can bring your l-o-n-g VW into the 21st Century with the only wiring kit of its kind - from Watson's StreetWorks, of course!

#VW-BUS $50.00


 


"BuggyPlus" Dune Buggy Wiring Kit

Finally, a complete wiring kit designed to give you everything you need to wire a street-legal "Buggy" using a VW Beetle chassis and components. The heavy-duty 10-circuit fuse panel has dual nut secured dust covers, mounting hardware, fuses and terminals. Wiring for: the starter solenoid, voltage regulator/alternator, ignition switch, lights, dimmer switch, horn, horn relay, wipers, heater/defroster motor, turn signals, 4-ways, brake lights and gauges. One each spare accessory and battery circuits. Dual Maxi-fuse system protection for the battery and charging system feeds, horn relay, turn signal and hazard flashers, wire ties, diagrams and instructions are all included. The wiring (except for the black ground wires) is all color coded and printed for application every 6 inches. NOT included are the switches, battery cables and spark plug wires.

#V-BP $279.00

This is NOT just a bag-o'-wires kit -

It is designed to put your VW chassis and components on the street!



Replacement Volkswagen Ignition Switch

If you're rewiring your VW and adding accessory circuits you need a new ignition switch that has that feature. Oh, yes. And it would be nice if it fit into the original dash hole...AND if it would clear the ash tray brackets. HEY! Guess what. This is it. This is a four position switch (Accessory, Off, On, Start) with a 3/4" shank, two keys and includes ring terminals for the outputs.

replacementvwignition.jpg - 2639 Bytes

#V-IS $30.00

 



Turn Signal Relay Pack

If you are changing taillights, you probably need this! Provides the brake light override circuitry so that you can use a single bulb "function" for both turn signals and brake lights (such as using a single 1157 bulb for taillights). Prevents the brake light from canceling out (overriding) the turn signal.

#L10-TSRP $65.00

NOTE ABOUT VW WIRING -Original VW wiring had separate taillight "bulbs" for the turn signals and brake lights, and they made the 4-ways and single turn indicator work by using a turn signal/flasher relay module (different for different years). If you no longer have that module and its wiring, or if you are changing over to taillights that use a common turn signal/brake light "bulb" you will need additional parts. (1) For original VW taillights but no module, you will need one of our VW 4-way switches on the next page in order to have 4-way flashers. (2) If you are changing to taillights that use a common turn signal/brake light "bulb", you will need one of our Turn Signal Relay Packs, below, to give you brake-light-override circuitry, AND one of our VW 4-way switches for 4-ways. (3) In either case, if you want to retain your single turn indicator light, you will need one of our Turn Signal Indicator Diodes on this page. (Also, for high beam dimming you may need one of our Latching Relays.)



Turn Signal Indicator Diode

Allows you to use one indicator light (like original VW) to show you that either the left turn, right turn or 4-way flashers are blinking. Both left and right "sides" feed through diodes to feed one light.

1 amp maximum load.

#V- TSID $8.00



VW 4-Way Hazard Wiring

If you no longer have the original turn signal/4-way relay module or switch and still are using your original style taillights, this wiring will restore 4-way capability without the expense ($50 - $70!) of a new module and wiring. Also works with our Turn Signal Relay Pack if you are switching to non-separate turn signal/brake lights like 1157 bulb units. Use with your own On/Off switch or see our switch selection above.

#L-VW4WX  (switch not included) $10.00


 

Rod Bits

If you want to rewire your Beetle with the best wiring kit available that's made specifically with the VW Beetle in mind, our Custom VW Modular Wiring Kit is it. It is the only premium VW Beetle wiring kit available and the only kit that solves the number one VW wiring problem... the design!

Take a look at original Beetle wiring diagrams. Really confusing aren't they?!?!? That's because the wiring was designed to be cheap. That's right, cheap, so that the car itself could be made as inexpensively as possible - minimum wire length, minimum wire gauge, maximum use of common connections. Even that simple looking fuse panel is confusing in that electricity flows "up" through one fuse and "down" through the next. You need to be extra careful as to what contacts are hot and most of them are wide open and accessible to that screw driver you're holding. It's confusing, dangerous and difficult to trouble shoot.

Our kits follow a properly engineered design that has been likened to a tree branch system. The hot power flows to the fuse box where it is branched to the different circuits. Each is protected by a fuse and connections are insulated and protected from accidental contact. The circuit wiring has been sized for the amperage that it will carry, it is color coded and line marked for the application. Our wiring diagram, is the best in the business - detailed for installation and with a general schematic for seeing the entire system.

Our "BuggyPlus" Dune Buggy Wiring Kit has been designed with the same improvements in mind, but downsized to take care of the basic needs of making a Dune Buggy street legal. Its 10 circuit fuse panel with dust covers provides the type of protection you need. Wiring is sized, marked and ready to install.

Both of our kits have primary system protection not found in any other VW wiring system, anywhere, at any price. Period.

So when you get ready to rewire your VW Beetle, Ghia, Thing or any of that platform vehicle, check out our kits and compare wire-for-wire. Youll see the difference. Add our Supplemental Wiring Kit for VW Bus or Transporter and you will have a super kit for that application.

These kits work great for other small vehicles, too, be it a more complex system suitable for our Custom VW Modular Wiring Kit or a more basic, street legal kit like our "BuggyPlus" Dune Buggy Wiring Kit. Know that our kit will provide superior quality in an easy-to-install wiring kit.

 

What are you working on

Copyright (c) 1999-2012 Watson's Streetworks Designed by WebLandHosting, LLC